GOODWIN GAGE
GOODWIN GAGE & TOOL CO.

HOME | LINE CARD | FORCE GAGES & TEST STANDS | OPTICAL COMPARATORS | REFERENCES |

 

Chatillon® DFS-R Series
Digital Force Gauge with Dedicate Remote Loadcell

Click here for a .pdf spec sheet

The Chatillon® DFS-R Series supplies accurate load measurement for capacities up to 1000 lbf, 5 kN. Ideal for handheld or test stand applications,measurement accuracy is better than 0.1% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, sensor actuation and direction. Measurements are displayed in ozf, gf, lbf, kgf and N units. The DFS-R gauge comes standard with RS-232 cable, carrying case, battery adapter/charger, and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard with sensors. The DFS-R gauge is supplied with our NEXYGEN DF Series software,

Standard Gauge Measurement Functions

  • Normal Tensile, Compression and Torque Measurement
  • Peak Tension, Compression and Torque Measurement
  • Sharp and % Break Detection
  • Contact Closure
  • Pass-Fail Limits
  • High & Low Setpoint Limits
  • Load Average
  • Time Average
  • Load Comparison
  • Statistical Calculations

Models (Includes Nexygen DF Series Software)

Model
ozf
gf
lbf
kgf
N
DFS-R-250G
8 x 0.002
250 x 0.05
0.5 x 0.0001
0.2 x 0.0001
2.5 x 0.0005
DFS-R-0002
32 x 0.005
1000 x 0.1
2 x 0.0002
1 x 0.0001
10 x 0.001
DFS-R-0010
160 x 0.02
5000 x 0.5
10 x 0.001
5 x 0.0005
50 x 0.005
DFS-R-0025
400 x 0.05
10,000 x 1
25 x 0.002
10 x 0.001
100 x 0.01
DFS-R-0050
800 x 0.1
25,000 x 2
50 x 0.005
25 x 0.002
250 x 0.02
DFS-R-0100
1600 x 0.2
50,000 x 5
100 x 0.01
50 x 0.005
500 x 0.05
DFS-R-0200
-
-
200 x 0.02
100 x 0.01
1000 x 0.1
DFS-R-0500
-
-
500 x 0.05
250 x 0.02
2500 x 0.2
DFS-R-1000
-
-
1000 x 0.1
500 x 0.05
5000 x 0.5

Common Accessories

Type Part No.
Capacity
Thread
Mates To
Standard
Chisel Point SPK-FMG-008A
100 lbf
#10-32F
#10-32M
Option
Point SPK-FMG-009A
100 lbf
#10-32F
#10-32M
Option
Notch SPK-FMG-010A
100 lbf
#10-32F
#10-32M
Option
Flat SPK-FMG-011A
100 lbf
#10-32F
#10-32M
Yes
Hook SPK-FMG-012A
50 lbf
#10-32F
#10-32M
Yes
Hook SPK-FMG-012B
100 lbf
#10-32F
#10-32M
Yes
Extension Rod SPK-FMG-013A
100 lbf
#10-32F
#10-32M
Option
Chisel Point SPK-FMG-008B
500 lbf
5/16-18F
5/16-18M
Option
Point SPK-FMG-009B
500 lbf
5/16-18F
5/16-18M
Option
Notch SPK-FMG-010B
500 lbf
5/16-18F
5/16-18M
Option
Flat SPK-FMG-011B
500 lbf
5/16-18F
5/16-18M
Yes
Hook SPK-FMG-012C
500 lbf
5/16-18F
5/16-18M
Yes
Extension Rod SPK-FMG-013B
500 lbf
5/16-18F
5/16-18M
Option
Battery Charger, 120/230V NC002860
Yes
Carrying Case SPK-DF-118
Yes

DF Series gauges having a capacity of 100 lbf or below have a #10-32M thread. DF Series gauges with capacities over 100 lbf have a 5/16-18M thread. Accessories are capacity dependent- only one accessory of a like type is supplied based on the force gauge capacity ordered.