GOODWIN GAGE
GOODWIN GAGE & TOOL CO.

HOME | LINE CARD | FORCE GAGES & TEST STANDS | OPTICAL COMPARATORS | REFERENCES |

 

Chatillon® LG Series
Mechanical Force Gauge

Click here for a .pdf spec sheet

The Chatillon® LG Series mechanical force gauge is ideal for tensile or compression force measurement applications up to 100 lbf, 50 kgf or 500 N. This unidirectional force gauge has one end dedicated to tensile tests and the other dedicated to compressive tests. The gauge features a large 2-1/4-inch dial which rotates 360-degrees for taring. A peak hold button is easy to use- it holds the pointer at the peak load. The LG Series has a force measurement accuracy of better than 0.5% full scale and included mechanical overload protection. The gauge is available in lbf, kgf and N units. The gauge comes with a Certificate of Calibration with NIST data, accessories and carrying case.

Standard Gauge Measurement Functions

  • Tensile Load (one direction dedicated to pull)
  • Compression Load (one direction dedicated to push)
  • Peak Tension or Compression Load (switch activated)

Models

Model
Capacity
Model
Capacity
Model
Capacity
LG-002
2 lb x 0.01 lb
LG-1KG
1 kg x 0.005 kg
LG-10N
10N x 0.05N
LG-005
5 lb x 0.025 lb
LG-2KG
2 kg x 0.01 kg
LG-20N
20N x 0.1N
LG-010
10 lb x 0.05 lb
LG-3KG
3 kg x 0.015 kg
LG-30N
30N x 0.15N
LG-020
20 lb x 0.1 lb
LG-4KG
5 kg x 0.025 kg
LG-50N
50N x 0.25N
LG-030
30 lb x 0.15 lb
LG-10KG
10 kg x 0.05 kg
LG-100N
100N x 0.5N
LG-050
50 lb x 0.25 lb
LG-20KG
20 kg x 0.1 kg
LG-200N
200N x 1N
LG-075
75 lb x 0.375 lb
LG-30KG
30 kg x 0.15 kg
LG-300N
300N x 1.5N
LG-100
100 lb x 0.5 lb
LG-50KG
50 kg x 0.25 kg
LG-500N
500N x 2.5N

Common Accessories

Type Part No.
Capacity
Thread
Mates To
Chisel Point SPK-FMG-008A
100 lbf
#10-32F
#10-32M
Point SPK-FMG-009A
100 lbf
#10-32F
#10-32M
Notch SPK-FMG-010A
100 lbf
#10-32F
#10-32M
Flat SPK-FMG-011A
100 lbf
#10-32F
#10-32M
Hook SPK-FMG-012A
55 lbf
#10-32M
#10-32F
Hook SPK-FMG-012B
100 lbf
#10-32M
#10-32F
Extension Rod SPK-FMG-013A
100 lbf
#10-32F
#10-32M
Carrying Case NC002710
-
-
-

The accessories listed above are supplied standard with the LG force gauge. The LG force gauge has a #10-32M thread. Accessories are capacity dependent- only one accessory of a like type is supplied based on the force gauge capacity ordered.