GOODWIN GAGE
GOODWIN GAGE & TOOL CO.

HOME | LINE CARD | FORCE GAGES & TEST STANDS | OPTICAL COMPARATORS | REFERENCES |

 

Chatillon® TLC Series
Interchangeable Loadcell Sensors

Click here for a .pdf spec. sheet

The CHATILLON® TLC Series loadcells are full-bridge strain gauge sensors complete with 15-pin plug. These loadcells are used exclusively with the all-new Chatillon TCD Series digital force testers. They may also be used with the Chatillon DFS-R-ND digital indicator (recalibration with the DFS-R-ND is required). The loadcell values and sensitivity factors are stored in memory within the sensor plug. When connected to a TCD Series tester or DFS-R-ND indicator, the capacity and calibration points are automatically recognized by the instrument. The instrument then becomes a full-featured load measurement instrument. The loadcells are connected to the TLC Series tester or DFS-R-ND with a retractable cord that extends fully to nearly 9 ft. (3 m).

Load Capacities

Model
ozf
gf
lbf
kgf
N
TLC-250G
8 x 0.002
250 x 0.05
0.5 x 0.0001
0.2 x 0.0001
2.5 x 0.0005
TLC-0002
32 x 0.005
1000 x 0.1
2 x 0.0002
1 x 0.0001
10 x 0.001
TLC-0010
160 x 0.02
5000 x 0.5
10 x 0.001
5 x 0.0005
50 x 0.005
TLC-0025
400 x 0.05
10,000 x 1
25 x 0.002
10 x 0.001
100 x 0.01
TLC-0050
800 x 0.1
25,000 x 2
50 x 0.005
25 x 0.002
250 x 0.02
TLC-0100
1600 x 0.2
50,000 x 5
100 x 0.01
50 x 0.005
500 x 0.05
TLC-0200
-
-
200 x 0.02
100 x 0.01
1000 x 0.1
TLC-0500
-
-
500 x 0.05
250 x 0.02
2000 x 0.2
TLC-1000
-
-
1000 x 0.1
500 x 0.05
5000 x 0.5
TLC-2000
-
-
2000 x 0.2
1000 x 0.1
10000 x 1
TLC-5000
-
-
5000 x 0.5
2500 x 0.2
20000 x 2
TLC-10000
-
-
10000 x 1
5000 x 0.5
50000 x 5